What is an army jacket?

In view of the wide assortment of circumstances that persons in the military endure everyday; it is not hard to comprehend why military gear must to be specially created to deal with a variety of conditions, and why military clothes must have extra features not included in the clothes typically available for normal people.

For one thing, military clothes are all a particular array of colors for disguise causes. Clothes intended for use in snow will be primarily white, jungle gear will be mostly green, desert gear will be primarily sand colored, etc. This is to ensure that soldiers blend into their surroundings as much as possible and are not easily seen by enemy divisions.

Besides every uniform used in the military comes a military jacket designed to be worn over the uniforms for additional security in the different circumstances a soldier may go through. All army shirts are fire-resistant and moisture-wicking to disperse sweat more rapidly therefore the jackets worn do not usually require any of these attributes, rather they possess padded areas to avoid bruises and injury, and are light-weight and resistant to dirt to compliment the shirts.

Different sections of the military like the Navy and Air Force have their specific jacket to handle the various conditions each may go through. In the army there are combat uniforms along with different jackets covered in permethrin, that functions as an insect repellant to keep insects away, and mandarin collars which can be turned up to guard the neck.

In the Combat set there is additionally a flame-resistant jacket that is self extinguishing in the incidence of fire, is lightweight, breathable and moisture-wicking. There is furthermore a Gore-Tex parka with 3 layers which are waterproof, windproof and breathable. The Gore-Tex parka has moisture wicking cuffs, and hems, a concealed hood, pockets with hand warmers within them and elbow strengthening.

There are additionally fleece jackets used in the army which are created to be breathable, very fast-drying if they get wet, gives excellent filling though being lightweight, and with reinforced shoulders, elbows and collars.

Field jackets that are a different type of military jackets have a hidden hood, a snap-up storm flap, drawstrings around the waist, hood and bottom of the jacket; detachable liners, a Velcro neck closure which lets the collar to be worn up or down, and Velcro cuffs in the sleeves for affixing gloves in colder weather.

Within the Advanced Protective Combat Uniform System there are 5 jackets; the Level III Pullover, the Level IV Windshirt, the Level V Soft Shell Jacket, the Level VI Rain Jacket and the Level VII Insulated Parka.

The Pullover is made of Powerstretch fabric and is amazingly warm in view of its light weight; it is incredibly breathable and moisture wicking and may be used in a vast assortment of temperatures. There are additionally touch points on the inside surface to optimize moisture management.

The Windshirt is highly water repellant and is additionally very lightweight, naturally it is greatly resilient to high winds and keeps warmth in. The Windshirt can be worn under other tiers for additional warmth.

The Soft Shell is made for stretching too and is especially treated to protect against dirt, grime and water; it is highly repellant to wind and water and is also breathable and moisture wicking.

The Rain Jacket is extremely light weight, weighing in at under 1 lb while at the same time providing excellent water shelter. It possesses a concealed hood within the collar and coated pockets.

Last but not least is the Insulated parka which is the most efficient in cold weather protection. It dissipates static charge, destroys odors, is water repellant and possesses hand warmers inside the pockets.

Materials:

Three balls of bulky yarn (preferably three different colours).

Tools:

A pair of scissors

A pair of straight knitting needles specifically size 17.5

Instructions:

1. The first thing to do is to cast on. Here’s how:

To cast:

Make a slip knot in order to fasten the yarn to the knitting needle. To do this, unwind about 8 inches of yarn from the ball. clutch it in your left hand between the thumb and forefinger.

Use you right hand to wrap the ball end of the yarn around the forefinger and middle finger in a clockwise way. Fingers should be about 1 inch apart.

Next, pull a loop of the ball end of the yarn through the loop around your fingers.

Drop the yarn off your fingers of your left hand but still grasp the loop with your right hand.

You are now ready to start knitting.

To Knit:

Wrap the yarn below and then over the right needle. Use your index finger to guide the yarn.

Slide the yarn through the stitch on the left needle.

Pull that new stitch onto the right needle.

Each time you add a new stitch to the right needle, remove the old stitch from the left needle.

Imitate the process until all the stitches on the left have been moved to the right.

swap hands to build new rows.

4. Knit 12 rows, and then cut the yarn with the scissors, leaving 6 inches.

5. Add the second yarn.

6. Hold the end of the old yarn along with the new yarn together.

7. Knit five stitches then bind the ends in a small knot.

8. Knit 12 rows with the new yarn.

9. Cut off the old yarn leaving 6 inches.

10. Add the new yarn and repeat the same process you went through when you added the latter yarn.

11. Knit the first 2 stitches to finish off the scarf. Pull the first stitch over the second one and then pull off the needle.

12. Knit the next stitch and do the same thing on the left.

13. Repeat this process until the edge is securely fastened. Your scarf is now ready to wear!

Outside of the head, the chest area is probably the most exposed section of the human body. In the event of a fight, persons need to guard these vulnerable areas from unseen objects or ammunition from going towards your upper body which otherwise cannot be stopped outside of putting on a protective vest. A vest can be considered as any covering like a bullet proof vest or just a vest filled with padded insulation. It is normally best though to have on a vest which shields you from bullets, this is good for both practical training and real life confrontations.

The type of vest is determined by what organization the vest will be worn. In most cases a army personnel would be attired in a more heavy duty vest in comparison to a police officer in some cases, depending on the intensity of the situation each entity has to face. Tactical vest can either be thin and lightweight or thick and insulated but always with multiple pockets. Lightweight vest are ideal for hot and humid temperatures so persons can be protected from the harmful rays of the sun but at the same time be able to keep you cool while moving through the landscape at a fast. Thicker and insulated vest are more ideal for cooler regions.

Protective vest are normally worn over a shirt, but can also be worn underneath. Tactical vest are usually created from high quality materials such as nylon, ballistic materials and aramid fibers which are formed together to make tactical clothing that provides the wearer maximum protection, with a minimum amount of trauma effect. These fabrics also make the vest very comfortable to wear, so it fits on whoever wears it.

Vests are built in various sizes that can fit anyone of any size so it isn’t too big or too small for the person. While it offers you maximum protection, tactical vest also provide you with the convenience of being able to move freely. Using a vest that makes a person feel discomfort and would create problems during times of travel. It always suggested that a vest has waterproof features so it is able to stand up to any type of weather conditions.