Do It Yourself – Install an Above Ground Pool
Installing an above ground pool is a much more affordable choice than building a standard below ground pool. These pools come pre-made and ready to be put in directly from the warehouse. Most people may prefer to consult a professional, however, there are others who wish to get their hands involved in the process. It is not very hard to carry out, although getting the assistance of someone else will make the process go much more quickly.
Prior to starting, you should look over the instructions and directions that are given to you with your pool. There may be minor details that will be relevant to each design and pool system therefore ignoring these can be damaging to the finished project. Once you have truly fathomed all the things that need to be done, then you can use this guide as an additional aid in the basic installation of your pool. However, if you find that you are not able to solely follow these written instructions, then viewing a video guide may also be helpful.
How To Install An Above Ground Pool
Required Materials
Pre-fabricated Pool
Sand
Gorilla Pad
Coving
Patio Stones
Concrete
Screws
Bolts
Required Tools
Shovel
Level
Drill
Instructions
To start you will need to level the ground. This is the most important step of the installation as you cannot hope to level the ground after your pool has been set up. Hence you will have to make the essential preparations. These are inclusive of, shovelling the area and getting it ready for your concrete. Preparing your concrete. Putting a layer of sand on your newly shovelled ground. Pouring the concrete over this area and then placing patios sized stones as levelers to support your pool frame. Basically, shovel, mix concrete, lay sand, pour over concrete, put in patios sized stones and let set. When you do this correctly you are already on your way to getting things done. Help at this point would be ideal. In addition use a level once the base has dried to ensure that it is indeed level, if it is not, you will have to make minor adjustments like pouring more concrete or chipping down what has already been laid.
It is a great idea for you to install a bit of gorilla pad. This will increase the longevity of your pool’s lining. It is created from an especially strong material which will safeguard your pool from naturally occuring elements including rocks, grass and weeds. It is basically resistant to destruction from pointy objects. This padding will undoubtedly be cushioning for your pool. If your pool is not built in with this type of padding, then get your own and cut it to fit the bottom section of your pool.
Set up your track and inner walls utilizing the manufacturer’s directions. Now your drill, bolts and screws will become necessary to the process. You may install some coving which will make installing the liner an easier task and will also safeguard the liner as well. The coving will lower the possibility that the metal in the pool will corrode. When contrasted to sand or dirt, cove will not be washed off and will not allow the metal to be compromised by extra moisture.
After you may install your vinyl liner. Allow it to attach completely to the pool by allowing the sun to totally penetrate it, you may oblige this process for an entire day and wait to full your pool with water until the following day.
The last part of the process includes filling the pool with water and constructing your pump and filtration system.
Your pool can then be utilized once all these things are put in place. However, wait a couple hours after you have dropped in the chlorine as this will be very rough on the eyes. As always make sure that small children do not swim alone, and possibly think about obtaining a covering to stop pesky leaves and other forms of debris from getting in your pool. Have fun and enjoy.