Let’s Learn How to Build a Go Cart Frame
Originally when go carts came into existence they were made out of board and were known as push carts as the only way to get them to move was if someone pushed them. Now though go carts use powerful 2 and 4 stroke engines and go up to speeds as high as 160mph. But the carts meant for the general public such as at amusement parks are limited to around 15mph for safety purposes.
Go carts are often used to introduce young drivers to racing. Also to practice for actual racecar driving as go carts improve a driver’s reactions, precision, control and decision-making proficiency.
There are several various sorts of go carts obtainable, a single seater or 2 seater, and there are several diverse outlines. If you realize a go cart is something you would like to possess you may buy one from a manufacturer or if you have some idea of what you are doing you may construct one. If you choose to try constructing one here are a few things you will need.
Required Tools
Chop saw
Chalk
Drill
Welding torch (optional)
Required Materials
Bolts and screws
Metal tubing
Gussets
¾ inch steel rod
2 bushings
Washers
Cotton pins
3/16 inch steel plate
½ inch steel rod
Instructions
To determine the dimensions of your go cart, you will need to, sit on the ground and use a piece of chalk to draw the outline of your legs as they may be in the go cart. So, that you have an estimation of the dimensions the go cart has to be. If you are not the individual who will be riding the go cart, make the actual rider or someone near in size assist you with the outline. You can also use the width of the seat or seats to decide on the width the go cart will need to be.
With the chop saw cut up the metal tubing to build your frame. Use the drill to make holes in the required parts of the metal tubing and next use the bolts and screws to connect the various sections of metal tubing. If you are useful with a welding torch you may weld the pieces together rather than using bolts and screws. Use gussets in all the corners to support the frame.
When you have the basic outline of your go cart frame, it is time to begin building in the additional areas to keep the engine in place, the steering and braking kits, the wheels, the seat and the roll bar if you are including one. Weld the steel plate to the rear end of the frame to serve as an engine mount later on, mark and drill out the holes necessary for bolting the engine in position. Use the ¾ inch steel rod and bushings to make your axle; put washers and cotton pins through drilled holes in the axle to keep it in place.
For the steering wheel use the ½ inch steel rod for connection. Take as much time as required to get the correct steering tilt and front-wheel vertical since the steering is clearly a highly critical element of the car.
Tips and Warnings
If you possess no previous awareness of what a go cart frame ought to look like you have to examine it and possibly even purchase construction plans or you will not know where to start.
Your go cart ought to be around 12 inches off the ground; the lower it is the better the center of gravity will be.
Any part of the procedure you are not familiar with or comfortable about doing, bring it to a professional since any minute mistake may be detrimental later on.
Now that you know how to build a go cart frame, get started!